Test the hole to see if it’s flexible enough to accommodate the hardware with a snug fit you may need to repeat the drilling process to loosen up the leather. Position the folded leather on a scrap block of wood, then slowly drill a hole through both layers of leather, making sure the top edges stay aligned. Mark an X in the center of the strap, ½-inch down from the cut edges. Step 4: Drillįold one of the leather straps in half, making sure the top edges are lined up. (If you prefer a more finished look, use leather wax to give the edges a deeper shine). Using a damp cotton rag, gently burnish the edges of the leather strip to remove any burrs and create a light polish. Mark the strap lightly with a pencil where you plan to cut, then use the metal ruler as a guide to cut straight across the leather with the X-Acto knife. Place the leather strap onto the cutting mat. Remember the leather will be folded into a loop-so if you want to make a 3.5-inch drawer pull (as we did) you’ll need a 7-inch leather strip. – Strong craft glue (Magna-Tac or similar) Step 1: Measureĭetermine how many pulls you’ll need for each drawer and how long you’d like each pull to be. – Brass binding barrel and screw (such as this one) for each pull – Leather strap in desired color and width Keep reading for their step-by-step guide to this simple yet transformative DIY. To give a simple thrifted dresser a bit of modern-meets-organic edge, they created a set of leather loop drawer pulls detailed with brass hardware. This project, on the other hand, was all about style. When One Kings Lane stylists Anthony Santelli and Drew Welsh gave Drew’s pint-size NYC apartment a major makeover, they incorporated a number of DIY solutions to maximize storage and functionality.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |